Veto Pro Pac Hose Hauler AX3685
The HOSE HAULER is a versatile storage solution that is specifically designed with HVAC technicians and plumbers in mind. It can store vacuum pump hoses, micron gauges, valve core removers, adapters, a bottle of vacuum pump oil and basic hand tools needed for performing an evacuation on an HVAC system. The HOSE HAULER features a removable interior pouch and 2 removable storage dividers, allowing for customization of the interior storage layout. The bag also features a water/oil resistant interior for easy clean up.
Features:
- Height (H): 17" (43cm)
- Width (W): 17" (43cm)
- Depth: 5" (13cm)
- Weight (empty): 4 lbs/1.8kg
- Internal Volume: 3090 in3/50.5 L
- Max Payload: 15lbs/7kg
- MAXIMIZED TOOL STORAGE CAPACITY:
- Up to 6 pockets
- Water/oil resistant tarpalon interior for easy clean up
- 2 exterior molle straps
- Removable interior pouch
- 2 Removable Dividers
- 2 Exterior D-Rings
- Rugged bottom to prevent tears and scratches
- YKK® zippers
Care and Maintenance:
- Warranty: 5 Years (see Veto warranty terms and conditions)
- Keep the Zippers Clean & Lubricated, over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
- Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
- Don’t Overstuff the Bag, overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed