Skip to content

Veto Pro Pac MP1X Compact Fabric & Leather Tool Pouch AX3661

€124.94 Inc. VAT

Code VPP10653


Add to Basket
Product Information

Veto Pro Pac MP1X Compact Fabric & Leather Tool Pouch

The MP1X is a small-sized tool pouch with both a leather Pocket Stuffer™, that easily slips into pants pockets for a quick retrieval, as well as wire-formed clip for securing to belts and Veto tool bags. Ideal for a minimum amount of electrical or networking tools the MP1X features 3 main pockets sized for linesmen, needle nose or snips and a pair of drivers. A pair of thru-pockets accommodate long shank or handled tools and 6 pen-sized pockets complete the sides of the pouch. The MP1X is topped off with a flush mounted stainless steel tape measure clip.

Features:
  • 9 Vertical pockets
  • 2 through pockets for long shanked tools
  • Back pocket Pocket Stuffer™
  • Electrical tape strap
  • 2 D-rings
  • Wire-formed and nylon plastic belt clip
  • Stainless tape clip
  • Leather & synthetic fiber construction
Specifications:
  • Exterior Height: : 10? (25.4 cm)
  • Exterior Width: 5? (12.7 cm)
  • Exterior Depth: 4.5? (11.4 cm)
  • Weight (empty): 0.9lbs/0.41kg
  • Internal Volume: N/A
  • Max Payload: 5lbs/2.25kg
Care and Maintenance:
  • Warranty: 5 Years (see Veto warranty terms and conditions)
  • Keep the Zippers Clean & Lubricated, over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
  • Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
  • Don’t Overstuff the Bag, overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed
Delivery Info

FREE delivery for all order over €100 inc Vat placed online in Ireland, This excludes BULKY ITEMS (Pallet deliveries) T&C apply. 

If you place an order online, we will contact you if any of your items are out of stock with current lead times or alternatives if suitable.

Returns Policy

Gift Vouchers Are Emailed To Recipients 

Gift Vouchers are Non-Refundable.  For any further queries please see our Terms & Conditions below or email sales@toolfix.ie

See Full Return Terms & Conditions. Click Here

Click to view complete product details

Recently Viewed Products Clear All







Close

POP-IN HTML goes here

Close

Your Basket

Your basket is currently empty