Runpotec 10203 RP5 cable pulling tool incl
The RP5 - RUNPOTEC Polyester Ø 5.5 mm is a cable pulling tool that includes a digital meter counter (for measuring the length of pipes/cables or for creating cable lists). The triple-twisted special plastic tape Ø 5.5 mm provides even better thrust than the Ø 3 mm fiberglass rod, and its friction resistance is only half as great due to its point-contact design. The patented RG7 guide tip with twist compensation (Ø 5.5 mm, crimped at the start and end of the tape) allows for navigating the tightest radii (bending radius 15 mm). The RP5 - RUNPOTEC Polyester (Ø 5.5 mm) is stored in a robust, construction-site-ready storage box with an ergonomic carrying handle. This box is equipped with the new anti-retraction device (stops only the RG7 guide tip), which prevents the cable pulling tape from accidentally slipping back. The meter counter’s unit of measurement can be switched from metric (m) to imperial (ft). The total breaking load of an incredible 270 kg applies to the entire pulling system. Labor-intensive and time-consuming repair work is eliminated, as this cable pulling system is virtually break-free. The RP5 can be stored in a very practical box in lengths of 20 m and 30 m. The 40 m RP5 replacement tape cannot be stored in the box. Optimal application: for pipe inner diameters of 9–32 mm
Features
- Integrated digital meter counter - ft/ m
- Total breaking load 270 kg
- 2 x RG7 - Guiding head with swivel Ø 7 mm
- Glide back protection (only stops the RG7 guiding head)
- Triple twisted special plastic tape Ø 5,5 mm
- 50 % less frictional resistance
- Virtually break-free, even with the tightest radii
Specifications
- Brand : Runpotec
- Dimensions: 398 mm x 320 mm x 49 mm
- Length: 30 m
- Bending radius: 15
- Total breaking load: 270 kg
- Recommended tube-Ø: 16-40 mm
- Weight: 1,836 kg (Gross weight)
- Further characteristics: inkl. Meterzähler
- EAN-Code: 9120045477580
Applications
- Cable pulling through conduits and ducts
- Low-friction cable installation
- Routing cables through bends and tight spaces
- Installing electrical, data and telecom cables
- Medium-duty cable pulling applications
- Guiding cables over longer distances
- Controlled cable feeding and retrieval
Comes With
- 1 x RP5 cable pulling tool Ø 5,5 mm with digital meter counter in a plastic box, length: 30 m, including 2 x RG7 RUNPOGLEITER with swivel (pressed on both sides)