Runpotec 20696 Multifunction mandrel attachment for X BOARD XB 300&500
The multifunction mandrel has been specially developed for XB 300, XB 500 and XB 500 T cable rolling systems. Loose cable bundles can also be rolled by attaching them to the stainless-steel center mandrel and then folding out the 4 side brackets. The telescopic center mandrel measures 72 mm in diameter. It is therefore also ideal for rolling a thinner cable bundle with a small inner diameter or individual wires. The normal height of the multifunction mandrel is 196 mm, which can be extended up to max. 294 mm via the telescopic mechanism. This means high cable bundles or corresponding tube bundles can also be rolled. When the 4 side brackets are unfolded, there is a total contact surface of 430 mm in diameter. Ideally, this should correspond to the respective cable or tube bundle. A designated opening allows the unit to be combined with the RUNPOSTICKS.
Optimum area of application: rolling of loose cable bundles or individual wires up to a max. height of 294 mm and a max. diameter of 430 mm
Features
- Can be used in combination with XB 300, XB 500 and XB 500 T
- Allows loose cable bundles and individual wires to be rolled
- Telescopic centre mandrel, extendable up to 294 mm
- this allows high cable bundles or corresponding tube bundles to be accommodated
Specifications
- Brand : Runpotec
- Dimensions: 240 mm x 85 mm x 80 mm
- Diameter: Unfolded: Heigth 294 mm, Ø 430 mm Closed: Height 196 mm, Ø 72 mm
- Weight: 0,59 kg (Gross weight)
- Material: Special plastic
- EAN-Code: 9120045476538
Applications
- Loose cable coil handling
- Single wire dispensing
- Small-diameter cable bundle handling
- Cable bundle expansion and support
- Cable organisation & tangle prevention
- Adaptation of XB 300 / XB 500 for loose cables
- Controlled cable payout and rewinding
Comes With
- 1 x Multifunction mandrel